Threaded Mode | Linear Mode

**LagunaD** · 12-07-2011, 05:35 PM

WTB Surge Rating...

Tongue

**Kaedis** · 12-07-2011, 05:54 PM

Shit, I swear I had that in there. Adding it...

Fixed. Had to cut off the first ~200 points of Surge for benefit of next 10, as it skyrockets near zero. It's around 1.98% from the first 10 points of surge.

Note these do not reflect relative dps value of the stats, as those will be class and spec dependent. These only reflect the raw scaling curves of each of the stats.

**LagunaD** · 12-07-2011, 06:39 PM

Is your curve for Expertise correct? It looks to me like it should cap at 20%.

**Kaedis** · 12-07-2011, 06:50 PM

Expertise (light blue) caps at 9%, exactly like the formula. You sure you're not looking at the Stat (crit) line? It doesn't cap at 30, but it scales slowly enough that the graph kinda appears like it does.

**LagunaD** · (This post was last modified: 12-07-2011 08:10 PM by LagunaD.)

(12-07-2011 06:50 PM)Kore Wrote: Expertise (light blue) caps at 9%, exactly like the formula. You sure you're not looking at the Stat (crit) line? It doesn't cap at 30, but it scales slowly enough that the graph kinda appears like it does.

The values I see in the node viewer are

cap = 0.20
divisor = 0.72

Anyway, not to be left out of the graphical fun, here's a plot of the value required to gain +1% to a bonus, given the current value.

[Image: attachment.php?aid=119]

EagleFox3 · 12-08-2011, 02:52 AM

Heya people, sorry my ignorance, but could you explain to me what MAX(level,20) stands for?

**LagunaD** · 12-08-2011, 03:05 AM

(12-08-2011 02:52 AM)EagleFox3 Wrote: Heya people, sorry my ignorance, but could you explain to me what MAX(level,20) stands for?

In mathematical terms, it means "Compare the value of 'level' to 20. If 'level' is less than 20, use 20 instead of 'level'".

In practical terms, it means that your secondary stats don't scale with level until Level 21.

**Kaedis** · 12-08-2011, 04:47 AM

Quote:The values I see in the node viewer are

cap = 0.20
divisor = 0.72

I was just using the values in the OP. If they are wrong, my apologies.

EagleFox3 · (This post was last modified: 12-08-2011 07:07 AM by EagleFox3.)

(12-08-2011 03:05 AM)LagunaD Wrote:
(12-08-2011 02:52 AM)EagleFox3 Wrote: Heya people, sorry my ignorance, but could you explain to me what MAX(level,20) stands for?

In mathematical terms, it means "Compare the value of 'level' to 20. If 'level' is less than 20, use 20 instead of 'level'".

In practical terms, it means that your secondary stats don't scale with level until Level 21.

Thanks Laguna, it was too obvious for me to accept that ahahaha, i thought it was maxima for a function.

**Freehugs** · 12-08-2011, 12:22 PM

Quote:The values I see in the node viewer are

cap = 0.20
divisor = 0.72

What node is that in?